HI 98302 EC/TDS tester - Quick and accurate TDS readings
- Pocket-sized and water proof
- Graphite sensor for enhanced repeatability
The DiST® testers are reliable, pocket sized instruments that will give you quick and accurate readings of conductivity and TDS. This popular line of Dissolved Solids testers has been redesigned to offer a host of improvements. The casing has been designed for increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time. If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the easily accessible trimmer on the side of the tester.
HI 98302 (DiST®2 with TDS factor = 0.5) is supplied complete with protective cap, screwdriver, batteries and instructions. |
|
|
| Range | 10.00 ppt (g/L) | | Resolution | 0.01 ppt (g/L) | | Accuracy (@20°C/68°F) | ±2% Full Scale | | Typical EMC Deviation | ±2% Full Scale | | Calibration Solution | HI 70038P | | Calibration | Manual 1 point through trimmer | | Temp. Compensation | Automatic from 0 to 50°C (32 to 122°F) | | Battery Type / Life | 4 x 1.4V / 150 hours approx. continuous use | | Environment | 0 to 50°C (32 to 122°F); RH 95% | | Dimensions | 175 x 41 x 23 mm (7.9 x 1.8 x 1") | | Weight | 78 g (2.7 oz.) |
|
|
|
Weight:
0.18 Pounds |
|
Dimensions:
0.00(L) x
0.00(W) x
0.00(H) Inches |
|
Weight Disclaimer: *Weight may vary based on configuration. |
|
|
|